- Allows longer settling time
- More efficient use of heat input
- Greater Flexibility of package design
- Easier to transport and set up
- Concentrates heat on the emulsion portion of the produced fluid
- Increases effective retention time
- Improves fuel gas economy
- Reduced operating temperatures.
|
- Removes solids continuously.
- Increased operating time.
- Lower maintenance cost.
- More efficient operation.
- Electrostatic model.
- Harsh environment housings.
- Packaging with other Primenergy equipment available.
|
| 4 x 12 |
800 BPD† |
8 x 30 |
8,000 BPD |
| 4 x 16 |
1,200 BPD |
10 X 40 |
16,000 BPD |
| 6 x 20 |
3,000 BPD |
12 x 50 |
24,000 BPD |
† Approximate sizes, based on 40° API oil and a 50% water cut, for quick reference only. Actual capacity depends upon well and produced fluid conditions. Contact your representative to determine your exact needs prior to ordering.
HORIZONTAL HEATER TREATER (HHT)
STANDARD EQUIPMENT
50 PSI WP ASME Code constructed Horizontal Heater Treater vessel with:
Inlet - Flanged
Gas Outlet - Flanged
Oil Outlet - Flanged
Relief Valve Nozzle - Flanged
3" NPT 3,000# Coupling Drain
4" NPT 3,000# Coupling Water Outlet
3/4" 6,000# Threaded Coupling T.I. and Thermostat
1/2" 6,000# Threaded Coupling Level Gauges (Sight Glasses)
150# Flanged Manway with Blind Flange, Nuts, Bolts and Gasket
Inlet Deflector Baffle
Separation and Coalescing Baffles
Oil Compartment
Level Control Nozzles
"U" Type Long Removable Firetube with Stack
Kimray T-12 Temperature Controller, Fuel Valve and Thermowell.
3/4" Thermometer 50-250°F Range with Thermowell.
0-200 PSI Range Pressure Gauge with 1/2" Isolating Valve.
Oil Level Controller.
Interface Controller
Low Level Controller
Kimray Oil and Water Dump Valves
ASME Code Relief Valve
2 - Sets 1/2" Gauge Cocks with 5/8" x 36" Gauge Glasses.
All equipment mounted on a Structural Steel Skid with interconnecting piping and fittings.
| 0 - 500 BBLS/DAY |
4' X 12' |
|
| 100 - 1,000 BBLS/DAY |
4' X 16' |
|
| 600 - 2,600 BBLS/DAY |
6' X 20' |
|
| 1,500 - 4,000 BBLS/DAY |
8' X 20' |
|
| 3,000 - 5,000 BBLS/DAY |
8' X 30' |
|
| 4,000 - 9,000 BBLS/DAY |
10' X 30' |
|
| 5,000 - 12,000 BBLS/DAY |
10' X 40' |
|
| 10,000 - 20,000 BBLS/DAY |
12' X 40' |
|
| 15,000 - 30,000 BBLS/DAY |
12' X 50' |
|
| 4' X 12' |
4' X 16' |
6' X 20' |
Safety Type Fuel Gas Scrubber with Internal Float to shut off with High Liquid Level, with necessary piping, controls, and Fisher regulators.
Cold weather protection insulation with metal sheathing.
Weather Protection Housing over controls.
Flame Arrestor with Eclipse Burner complete with fittings.
2" Kimray Pilot - Operated Back Pressure Valve.
Internal Coating with Coal Tar Epoxy.
Skid mount Heater Treater and Fuel Gas Scrubber on a two runner wide flange type skid.
Unitize system with piping and fittings to skid edge for ease of field installation.
*ADDERS for other units will be provided upon request.
|
12’x60’ Treater
8’x35’ Heater Treater
12'x70' Electrostatic Desalter Three-Phase
12'x50' Electrostatic Treater with insulation bands, insulation to be installed on location
10'x40' Electrostatic Treater, 10'x40' Free Water Knockout
72" ODx25' S/S @ 50 W.P. Horizontal Heater Treater
10'x40' Electrostatic Treater
Vertical Treaters with Test Separators |
