- Increased efficiency
- Controlled flow pattern
- Smaller physical size
- Increased glycol contact area
- Reduced glycol circulation rate
G
- Maximizes glycol surface area
- Increases glycol drying efficiency
- Improves initial drying
- Decreases required retention time
- Reduces physical size requirements
|
- Increases overall drying capabilities
- Collects free liquids
- Reduces gas turbulence
- High Efficiency Reboiler
- Increases fuel gas efficiency
- Reduces glycol loss
- More effective water removal
- Preheats wet glycol
- Reduces gas consumption
- Improved cooling increases water absorption
- Inlet gas scrubber
- Glycol to Distillate Separator
- Packaging with other Primenergy equipment available
|
| 10.75" x 6' |
1 MMCF* |
| 10.75" x 9' |
3 MMCF |
| 12.0" x 9' |
5 MMCF |
| 16.0" x 9' |
10 MMCF |
| 20" x 12' |
20 MMCF |
| 36" X 15' |
50 MMCF |
Custom sizes to fit your needs.
* Actual capacity will vary depending upon well and produced gas conditions. Contact your representative to determine your exact needs.
GLYCOL DEHYDRATOR STANDARD EQUIPMENT
1440 PSIG WP Vessel ASME Code with:
Gas Inlet
Gas Outlet
Liquid Outlet
3/4" Thermometer
3/4" Gauge Column
Level Control
Fisher 128 PQC Control Valve
Penberthy Gauges Column w/Cocks
0-250°F Thermometer
1440 PSIG WP ASME Code Horizontal Contactor with:
Gas Inlet
Gas Outlet
Relief Valve
1/2" NPT Pressure Gauge
Glycol Inlet
Glycol Outlet
Drain
Thermometer
0-1500 PSIG Pressure Gauge w/Isolating Valve.
ASME Code Relief Valve set at 1,440 PSIG.
0-250° Dial Face Thermometer with Thermowell.
2,000 PSIG WP Check Valve on Glycol Inlet.
2,000 PSIG WP Ball Valves for Drain and Isolating of
vessel from Pump and Reboiler.
External "U" Tube Glycol to Gas Heat Exchanger.
Reboiler-Surge Vessel complete with:
Still Column Flange
Fill Connections
Drain
Gauge Glass
Glycol Outlet
Thermometer
Temperature Controls
Vapor Outlet
Kimray Glycol Pump with Unions, Block and Bleed Ball
Valves for Removal.
Temperature Controllers (2) One for Normal Control,
One for High Temperature Shutdown.
0-500°F Dial Face Thermometer with well.
High Pressure Instrument and Burner Gas Regulator.
Low Pressure Instrument and Burner Gas Regulator.
Low Pressure Strainer Pump Suction "Y" Type.
2,000 PSIG WP Glycol Filter w/75 Micron Element on
Inlet to Power Side of Pump, Block and Bleed Valves for Element Changing.
316 S.S. Internal Glycol to Glycol Exchanger.
Removable Firetube with Flanged Stack.
Removable still Column packed with Ceramic Saddles.
0-60 PSIG Pressure Gauge with Isolating Valve.
Flame Arrestor with Burner and Pilot Light Assembly.
Set Gauge Cocks with Glass.
Fiberglass Insulation with Embossed
Aluminum Jacketing.
All Equipment mounted on a Structured Steel Skid with Interconnecting Piping and Fittings.
GLYCOL DEHYDRATOR
| 0-1 MM |
10-3/4" X 4' |
10-3/4" X 6' |
16" X 7' |
|
| 0-3 MM |
10-3/4" X 4' |
10-3/4" X 9' |
16" X 7' |
|
| 2-5 MM |
12" X 4' |
12" X 9' |
16" X 7' |
|
| 4-7 MM |
14" X 4' |
14" X 9' |
20" X 7' |
|
| 6-10 MM |
16" X 4' |
16' X 9' |
20" X 7' |
|
| 10-14 MM |
18" X 4' |
18" X 9' |
24" X 7' |
P.O.A. |
| 15-20 MM |
20" X 5' |
20" X 12' |
24" X 10' |
P.O.A. |
| 18-28 MM |
24" X 5' |
24" X 12' |
30" X 10' |
P.O.A. |
| 25-35 MM |
30" X 5' |
30" X 15' |
36" X 10' |
P.O.A. |
| 35-50 MM |
36" X 6' |
36" X 15' |
48" X 10' |
P.O.A. |
• P.O.A. - Price on application
|
