- Allows longer settling time
- Small physical size
- Greater flexibility of package design
- Easier to transport and set up
- Improves solid handling capability
- Reduces internal turbulence
- Increases gas separation
- Reduces system pressure drop
- Improves solid separation
- Virtually eliminates turbulence
- Calms interface for more efficient operation
|
- Positive identification of interface
- Greater flexibility for well conditions
- Virtually eliminates carry over
- Dryer gas stream
- Greater recovery of salable liquids
- Gas meters
- Internal Plastic coatings
- Vane type mist extractor
- Adjustable Bucket and Weir Type Controls
- Positive displacement metering
- Harsh environment housings
- Packaging with other Primenergy equipment available.
|
| 24" x 7'-6' |
2700 BPD |
3.5 MMCFD |
| 24" X 10' |
3700 BPD |
4.8 MMCFD |
| 30" x 10' |
5800 BPD |
7.6 MMCFD |
| 36" x 10' |
8300 BPD |
10.9 MMCFD |
| 16" x 10' |
1420 BPD |
8.7 MMCFD |
| 20" x 10' |
2160 BPD |
13.2 MMCFD |
| 24" x 10' |
3200 BPD |
19.6 MMCFD |
| 30" x 10' |
5000 BPD |
31.0 MMCFD |
| 30" x 15' |
7500 BPD |
38 MMCFD |
| 36" x 15' |
11,000 BPD |
55 MMCFD |
| 36" x 20' |
15,000 BPD |
65 MMCFD |
* Approximate sizes, based on 40° API oil and a 50% water cut, for quick reference only. Actual capacity depends upon well and produced fluid conditions. Contact your representative to determine your exact needs prior to ordering. Larger sizes available upon request.
2 PHASE LOW PRESSURE SEPARATOR STANDARD EQUIPMENT
125 PSIG WP ASME CODE HORIZONTAL TWO PHASE LOW PRESSURE SEPARATOR COMPLETE AS FOLLOWS:
One 150# ANSI Flanged Gas Inlet & Outlet
Two 3,000# Threadolet Liquid Level Control
One 150# ANSI Flanged Liquid Outlet
One 3,000# Threadolet Relief Valve
One 3,000# Threadolet Supply Gas
Four 3,000# Threadolet Gauge Glass
One 3,000# Threadolet Drain
One 3,000# Threadolet Thermometer
Inlet Diverter
Wave Breaker
S.S. Wire Mesh Mist Extractor
Vortex Breakers Over Oil and Water Outlets
One NPT Liquid Level Control
One 2" NPT Dump Valve
One Penberthy Reflex Gauge Glass Assembly and Draincock
One Threaded Relief Valve Set at Vessel W.P.
One NPT Hammer Union Rupture Head with One (1) 125 PSIG Disc
One 0-150# Pressure Gauge
One Regulator
One Condensate Chamber w/Draincock
One NPT Steel Isolating Needle Valve
One H.P. Drip Pot
Miscellaneous S.S. Fittings and S.S. Tubing
All equipment mounted on a structural steel skid with interconnecting piping and fittings.
| 24" x 7-1/2' |
0-4 MM |
0-1400 |
|
| 24" x 10' |
1-5 MM |
400-1900 |
|
| 30" x 7-1/2' |
3-6.3 MM |
1000-2500 |
|
| 30" x 10' |
4-7.6 MM |
1500-3000 |
|
| 36" x 10' |
5-11 MM |
2500-4500 |
|
Internal coating with Coal Tar Epoxy
3 PHASE LOW PRESSURE SEPARATOR STANDARD EQUIPMENT
125 PSIG WP ASME CODE HORIZONTAL THREE PHASE LOW PRESSURE SEPARATOR COMPLETE AS FOLLOWS:
One 150# ANSI Flanged Gas Inlet & Outlet
Two 3,000# Threadolet Liquid Level Outlets
One 150# ANSI Flanged Oil Outlet
One 150# ANSI Flanged Water Outlet
One 3,000# Threadolet Relief Valve
One 3,000# Threadolet Supply Gas
Four 3,000# Threadolet Gauge Glass
One 3,000# Threadolet Drain
One 3,000# Threadolet Thermometer
Inlet Diverter
Wave Breaker
S.S. Wire Mesh Mist Extractor
Vortex Breakers Over Oil and Water Outlets
Two NPT Liquid Level Controls
Two 2" NPT Dump Valves
Two Penberthy Reflex Gauge Glass Assemblies and Draincock
One Threaded Relief Valve Set at Vessel W.P.
One NPT Hammer Union Rupture Head with One (1) 125 PSIG Disc
One 0-150# Pressure Gauge
One Regulator
One Condensate Chamber w/Draincock
One Regulator
One 0-200# Pressure Gauge
One NPT Steel Isolating Needle Valve
One H.P. Drip Pot
Miscellaneous S.S. Fittings and S.S. Tubing
All equipment mounted on a structural steel skid with interconnecting piping and fittings.
| 24" x 10' |
2700 BPD |
3.5 MMCFD |
|
| 30" x 10' |
3700 BPD |
4.8 MMCFD |
|
| 36" x 10' |
8300 BPD |
10.5 MMCFD |
|
Internal coating with Coal Tar Epoxy
|
